Warning: Undefined variable $dash_classes in /home/devhiperfire/public_html/wp-content/themes/hiperfire/woocommerce/content-single-product.php on line 89
HIPERFIRE® Feel What You Become.™ Banner
HIGHLIGHT
- HIPERFIRE® Mindset Banner
- Adapt
- Control
- Command
- Vinyl
- Single-Sided
- Four Corner Grommet Holes
- Dimensions: 72 x 18 Inches
HIPERTOUCH Elite: “I just installed a Hyperfire Elite trigger in my AR-10. My goal was to cure some fail to fire issues due to light primer strikes using some foreign military surplus ammo. I have only installed an AR trigger once before and was thinking the Hyperfire trigger could be a problem for me to install. It was way easier than I thought. I did learn one trick to pass along. The trigger and hammer installation is very straight forward. Compressing the coil springs looked like a problem area. I used a 5/32 inch pin punch (flat working end) and cupped my free hand over the spring assembly to prevent lost springs. Success on the first attempt with no flying parts. The trick is to position the yoke just above the notch where it will rest. Push straight in and slightly downward and it falls right into place. The difference between the Elite trigger and military stock trigger is amazing.”
HIPERTOUCH Reflex: “I’ve disliked my Oly AR-15 since the first time I shot it 22 years ago — pie plate accuracy just isn’t my thing. It’s had a red dot for all this time so I figured I’d scope it and try it out with magnification…nope still crap; lucky to get 5 MOA out of it. In a last ditch effort, and after some great customer service (thanks Steve!), I went with a Hipertouch Reflex and now it shoots 1 MOA or less. And thanks for taking care of us military peeps, it made it easier to pull the trigger on a big purchase. I have already been spreading the word at work and with my friends.”